Results for: How to un disabled iphone

20 search results for how to un disabled iphone is presented below.

Are you looking for how to un disabled iphone? The official links that we have supplied below are the simplest method to do so. All of our links are kept up to date at all times.

discussions.apple.com

Question: Q: how to un disable iphone 6s ? Last week my iPhone screen smashed and with that I had no control over the phone and couldn't even turn it off . With that the iPhone …

How To Unlock a Disabled iPhone

How To Unlock a Disabled iPhone. Getting the “iPhone is disabled” message may give you an unpleasant jolt, but it happens all the time. In this article, you are going to find out …

How To Unlock a Disabled iPhone

Getting the “iPhone is disabled” message may give you an unpleasant jolt, but it happens all the time. In this article, you are going to find out how to deal with this problem, hopefully without losing any valuable data.

Disabling your phone can happen with or without intention. For example, you can have a young relative over and leave your phone on the table. The kid tries to use it to play games and gets your screen locked in the process.

Someone coy can try to access your iPhone behind your back in order to see something they are not supposed to. If they get the passcode wrong too many times, your screen will get locked.

This is not a bad feature overall because it keeps the data stored on the device safe. Nobody can access it but you even if your phone gets stolen.

What Happens when iPhone is Blocked

You will get a notification about your iPhone being disabled after you type in the passcode incorrectly too many times. For the first five attempts, you only have to wait for 1 minute to try again. After 7 incorrect entries, you have to wait 5 minutes. After 8, it is prolonged to 15 minutes, and finally, on 9 failed attempts in a row, it says to try again in 60 minutes.

At this point, you really need to sit down and try to remember the code before you go for the next attempt. The tenth failed passcode attempt will totally disable your phone. Now it will give you the option to connect to iTunes to retrieve the data if you have backed it up. You can also use iCloud to restore data. In case you have no backups, you can say goodbye to all your pictures, videos, and other data because it will all be permanently deleted.

unlock a disabled iPhone

Best Methods for Unlocking a Disabled iPhone

There are three ways of unlocking your iPhone. You can use iTunes, iCloud, or recovery mode (as a last resort). In case you synced your iPhone with iTunes and you created a backup there, use the first method. If you enabled the Find My iPhone option in iCloud, use the second method. Finally, if you have not done any of that, you have to use the third method.

Method 1- Use iTunes to Unlock Your iPhone

Your device has to be synced with iTunes prior to being disabled. Proceed with these steps if that is the case:

  1. Use a computer that you already synced with your iPhone. Connect your iPhone to it with a USB cable.
  2. In case you still don’t remember your passcode and you are asked for it, use another PC or skip to recovery mode.
  3. If you already have a backup, you are good to go.
  4. Open iTunes and select your device at the top left of your screen. You will then see the information about your phone.
  5. In the middle of the screen, a little to the right, you will see the Restore iPhone option. Select it.
    How to unlock disabled iPhone
  6. Proceed by following the instructions. This will delete all your data, which you hopefully backed up.
  7. Then your phone will start as good as new. Keep following the setup.
  8. Now you can restore your iPhone by selecting Restore from iTunes Backup. You will probably want the newest backup.

iphone backup

Method 2- Use iCloud to Unlock your iPhone

Use a browser on your PC and go to the iCloud website. Use your Apple ID and password to log in. Then follow these steps:

  1. Choose All Devices at the top of the screen.
  2. Select iPhone.
  3. Your device must be connected to a network and a power source.
  4. Select Erase iPhone and confirm.
  5. Type in your Apple password to restore all your purchases.
  6. Everything will be deleted and your iPhone will power up totally new.
  7. Follow the setup instructions.
  8. When you are prompted to choose the backup option, select Restore from iCloud Backup. Choose the newest one.
  9. It can take a while to restore everything, so be patient and let your phone remain on the charger and connected to Wi-Fi.

You will need a computer with the newest version of iTunes installed on it for this method to work. Then you need to:

  1. Start iTunes.
  2. Force restart your phone.
  3. In quick succession: hold and release the volume up button, then the volume down button. Hold the side button until you can connect to iTunes.
  4. Recovery mode will start and you will be able to choose Update. Do it and iTunes will try to restore your iPhone and keep your data.
  5. Wait for a while. If it does not work, you can try again but select Restore instead of Update.
  6. It will start good as new and you will be able to get backup from iCloud or iTunes.

Unlock Successful

Do not get scammed by online services offering to do unlock your disabled iPhone. Following the above methods is all you need to succeed.

forums.att.com

How do i unlock a disabled iphone My daughter disabled her IPhone 6s plus and when we try to connect to iTunes we get an 0xE000015. I have called all over and no one …

People also ask
  • How to unlock a disabled iPhone that is not in use?

    For an iPhone that is disabled, you have to connect the iPhone to iTunes via your computer to access it again. You must have made a back up on that computer and the passcode for the iPhone. Way 1: Connect Disabled iPhone to Synced iTunes If you've previously synchronized your iPhone with iTunes, you can back up your disabled iPhone and unlock it.

    user case

    What Does "iPhone Is Disabled" Mean?

    In general, iPhone is disabled because you've entered the wrong passcode too often. The disabled notification on iPhone would be different according to times of entering wrong passcode.

    Here is when the error messages show for the number of wrong guesses:

    • When you enter wrong passcode for 6 times, it will says "iPhone is disabled. Try again in 1 minutes"
    • When you enter wrong passcode for 7 times, it will says "iPhone is disabled. Try again in 5 minutes"
    • When you enter wrong passcode for 8 times, it will says "iPhone is disabled. Try again in 15 minutes"
    • When you enter wrong passcode for 9 times, it will says "iPhone is disabled. Try again in 60 minutes"
    • When you enter wrong passcode for 10 times, it will says "iPhone is disabled. Connect to iTunes"

    "iPhone is disabled connect to iTunes" means your iPhone is permanently disabled, which is the most serious situation. Your iPhone may also be disabled in some strange situation by accident, like after you update your iPhone.

    Tip:When the disabled message says "try again in XX minutes", you can wait for it. But if it says "connect to iTunes", you should take action instead of waiting.

    How to Connect to iTunes When iPhone Is Disabled

    For an iPhone that is disabled, you have to connect the iPhone to iTunes via your computer to access it again. You must have made a back up on that computer and the passcode for the iPhone.

    Way 1: Connect Disabled iPhone to Synced iTunes

    If you've previously synchronized your iPhone with iTunes, you can back up your disabled iPhone and unlock it.

    Step 1: Connect your disabled iPhone to the computer you synced with before now.

    Step 2: Launch iTunes on your computer. If you are prompt to enter a passcode, use another PC you have synced with before or try the recovery mode.

    Step 3: Wait for iTunes to sync your iPhone and create a backup.

    Step 4: After completing the syncing and the backing up, click on "Restore iPhone".

    Restore iPhone

    Step 5: Then it's done, you need to set up your iPhone. On your iPhone, select "Restore from iTunes backup" from the Set Up screen.

    Restore from iTunes backup

    Step 6: Choose your iPhone device in iTunes. Check for date and size of each backup and select the most relevant one to you.

    select from iTunes backup

    Way 2: Connect Disabled iPhone to iTunes in Recovery Mode

    You will need to try the recovery mode option if you have never synced with iTunes before. Your data will be lost and its passcode.

    Step 1: Connect your iPhone device to your computer and launch iTunes. If you don't own a computer, you can tell a friend to lend you or visit an Apple Retail store or Authorized Service Provider.

    Step 2: After connecting your device, force-restart it:

    • For iPhone 8 or later users: press and quickly release your Volume up button. Furthermore, press and quickly release your Volume Down button. After that hold your side button until it takes you the recovery mode screen.
    • For those using iPhone 7/7 Plus: press and hold both the Side button and Volume down button at the same time. Keep holding the buttons until it takes you the recovery mode screen.
    • On an iPhone 6s and earlier model: press and hold the Home button and the Top (or Side) button at the same time. Hold the buttons until you get to the recovery mode screen.

    Step 3: When you see the option to either "Restore or Update" your device, pick "Restore".

    restore iPhone

    For like 15 minutes, iTunes will engage in downloading software for your device. If it exceeds 15 minutes, your device is likely to exceed the recovery mode, and you will have to repeat step one and two.

    Step 4: Wait for the complete process, and then you can set up your device for use.

    Also Read: How to Factory Reset Disabled iPhone without/with iTunes >>

    How to Fix Your Disabled iPhone without Connecting to iTunes

    If you connect your disabled iPhone to iTunes and iPhone is still stuck at disabled screen, consider using the third-party tool - iMyFone LockWiper is the ultimate remedy for any disabled iPhone. It works for all iOS models and can unlock your device without hassles or running into a hitch.

    LockWiper - Your Mighty iPhone Passcode Expert

    • Easily and instantly fix iPhone disabled screen without passcode without iTunes
    • Gain quick access on your iPhone even when its screen is broken or unresponsive
    • Unlock all digits passcode, Face, and Touch IDs without hassles
    • Solve all screen lock problem, like iPhone is stuck at recovery mode, white/black screen, Apple logo, etc.
    • Support every iOS model and version, including iOS 15 and iPhone 12 series.

    How to Resolve Your Disabled iPhone without Connecting to iTunes

    Step 1: Be Prepared

    Download, install and start iMyFone LockWiper and then click "Start" to start the process. Connect your iPhone to your computer system.

    Try It FreeTry It Free

    Make sure your device is set to DFU mode: select your device model on the top bar of the application and follow the instructions.

    iMyFone LockWiper screenshot

    Step 2: Download Firmware Package

    Before downloading the package, make sure you have confirmed your device model and detected it automatically by the program or manually change it to the correct model. Then click "Download" to get started.

    iMyFone LockWiper screenshot

    When firmware has been downloaded, start to verify the firmware with your iPhone.

    iMyFone LockWiper screenshot

    Step 3: Remove Disabled Screen

    Click on "Start Unlock" to start the unlock process.

    Go through the notice on the screen carefully and enter "000000" to double confirm an agreement to unlock your device, and then choose "Unlock".

    iMyFone LockWiper screenshot

    The lock will be removed from your device within a few minutes.

    iMyFone LockWiper screenshot

    You may be interested: iMyFone LockWiper Review: Does It Work >>

    How to Connect to iTunes When iPhone Is Disabled
  • How do I enable my disabled iPhone?

    [Solution] How to Enable My Disabled iPhone 1 Connect your iPhone to the computer where iTunes is installed. 2 Open iTunes. 3 Click the iPhone icon. 4 Click Sync. 5 Type the passcode and click Restore. See More....
    1. 1

      Connect your iPhone to the computer with iTunes installed. If you see the message “iPhone is disabled. Please connect to iTunes,” you’ll need to connect it to the computer on which you’ve backed up your data.

      • This method will only work if you backed up your iPhone to iTunes and know the passcode.
    2. 2

      Open iTunes. If iTunes didn’t open when you plugged in your iPhone, click the iTunes icon on the Dock (macOS), or in the All Apps area of the Start menu (Windows).

      Advertisement

    3. 3

      Click the iPhone icon. It’s near the top-left corner of iTunes.

    4. 4

      Click Sync. iTunes will ask for your passcode.

    5. 5

      Type the passcode and click Restore. This will restore your iPhone with the latest iTunes backup.

      Advertisement

    1. 1

      Check the number of minutes indicated in the notification. After the amount of minutes specified in the message, you’ll be able to attempt another login.

    2. 2

      Enter the correct passcode. If you cannot remember the passcode, continue with this method.

    3. 3

      Connect your iPhone to any computer with iTunes installed. Use the USB cable that came with your iPhone or one that’s compatible.

    4. 4

      Do a force-restart on your iPhone. The steps vary by model:

      • iPhone X, 8, and 8 Plus: Press and quickly release the Volume Up button, then the Volume Down button, and then press and hold the button on the right-side of the phone until the phone reboots to the recovery screen.
      • iPhone 7 and 7 Plus: Press and hold Volume Down and the Power Button at the same time. Keep pressing until the phone reboots to the recovery screen.
      • iPhone 6 and earlier: Press and hold the Home and Power buttons at the same time until the phone reboots to the recovery screen.
    5. 5

      Open iTunes. If iTunes didn’t open when you plugged in your iPhone, click the iTunes icon on the Dock (macOS), or in the All Apps area of the Start menu (Windows). Once the app opens, it will display the Recovery Mode screen.

      • If you see Update as an option on the Recovery Mode screen, click it to see if it gets you back into your phone. If updating doesn’t work, continue with this method.
    6. 6

      Click Restore iPhone…. A confirmation message will appear, informing you that the next step will restore your iPhone to its original factory settings.[1]

    7. 7

      Click Restore. Your iPhone will be reset to its original settings. You’ll be able to set it up from scratch and configure a new passcode.

      Advertisement

    Add New Question
    • Question

      My phone was lost, then recovered. By that time I'd made a claim and received a replacement phone. Now my phone is disabled and I am trying to enable it and it won't let me. What do I do?

      Community Answer

      My best suggestion is to take it into the Apple store. The SIM card should still be in the phone, so they should still be able to get the data from it. Maybe the battery was out, and they can replace it there.

    Ask a Question


    Advertisement

    1. https://support.apple.com/en-us/HT201252

    Nicole Levine, MFA

    This article was written by Nicole Levine, MFA. Nicole Levine is a Technology Writer and Editor for wikiHow. She has more than 20 years of experience creating technical documentation and leading support teams at major web hosting and software companies. Nicole also holds an MFA in Creative Writing from Portland State University and teaches composition, fiction-writing, and zine-making at various institutions. This article has been viewed 95,467 times.

    Co-authors: 6

    Updated: December 9, 2020

    Views: 95,467

    Categories: IPhone

    • Print
    • Send fan mail to authors
    Thanks to all authors for creating a page that has been read 95,467 times.
    How to Enable a Disabled iPhone: 12 Steps (with Pictures)
  • How to fix an iPhone disabled without iTunes?

    For instance, dr.fone - Screen Unlock (iOS) provides a simple, fast, and working solution to do an iPhone disabled fix without iTunes. It can remove pins, passcodes, face ID, touch ID, and the common security locks. In this way, you can gain an access to your disabled iPhone again.

    • Filed to: iPhone Unlock • Proven solutions

    If your iPhone has been disabled recently, then you must be thinking the same. It usually happens when we enter the wrong passcode consecutive times (more than 10). This permanently locks our device and disables it. The catch is since the iOS device is disabled, users find it hard to connect it to iTunes. Don’t worry, you can still unlock disabled iPhone without iTunes. I have come up with not one, but two solutions for how to reset disabled iPhone without iTunes right here.

    Part 1. How to Unlock a disabled iPhone with iPhone lock screen removal

    Since iTunes can’t help you fix this issue, it is better to use a dedicated tool. For instance, dr.fone - Screen Unlock (iOS) provides a simple, fast, and working solution to do an iPhone disabled fix without iTunes. It can remove pins, passcodes, Face ID, Touch ID, and the common security locks. In this way, you can gain access to your disabled iPhone again, especially it can Unlock an iPhone with Broken Screen easily.

    The tool is compatible with every leading iPhone model like iPhone XS, XS Max, XR, X, 8, 7, etc. It can unlock a second-hand iPhone, a disabled device, and fix all the other related scenarios. The application is available for both Mac and Windows versions as well.

    toolkit-for-ios

    Unlock Disabled iPhone/iPad/iPod touch within a few clicks.

    • Remove 4-digit / 6-digit passcode, Touch ID & Face ID on iPhone/iPad.
    • Easy and click-through process. No technical skills are required.
    • Fully compatible with iOS 12 and iPhone XS/XR.
    Free Download Free Download

    2,985,172 people have downloaded it

    To learn how to restore iPhone without iTunes when disabled, follow these steps:

    Step 1: Connect your iPhone

    Download and install dr.fone on your Windows or Mac computer. Launch the dr.fone and click on the “Screen Unlock” feature from here.

    unlock disabled iphone with iskysoft toolbox

    Using an authentic cable, connect your iOS device to your Mac or Windows. Once your device is detected, you will get the following screen. Click on the “Start” button to initiate.

    connect disabled iphone to computer

    Step 2: Boot your device in the DFU Mode

    In order to unlock disabled iPhone without iTunes, you need to boot your device in the DFU (Device Firmware Update) mode. The key combinations for different iPhone models would slightly vary. You can just go to the respective tab on the interface and follow the on-screen instructions to boot your device in the DFU mode.

    boot disabled iphone in dfu mode

    If you have an iPhone 6s or an older model, then press the Home and the Power button at the same time. After 10 seconds, let go of the Power button only, but keep holding the Home key. The device screen should remain black.

    For iPhone 7 and 7 Plus, simply hold the Power and Volume Down key at the same time. Keep holding them for the next 10 seconds. After that, release the Power key while still holding the Volume Down button for the next 5 seconds.

    If you have an iPhone 8 or a newer model, then press the Side button first for 3 seconds. While still holding it, press the Volume Down key. Keep holding them for the next 10 seconds. Now, let go of the Side key while still holding the Volume Down button.

    Step 3: Download the firmware update

    As soon as your iPhone would enter the DFU mode, the application will detect it and display the following screen. Just enter the specific details about your phone like its model, serial number, etc., and click on the “Download” button.

    download iphone firmware

    This will start the downloading of the latest and stable firmware version for your phone. The process might take a while. Just be sure to have a working internet connection to complete the download.

    Step 4: Unlock your device

    Once the firmware download is completed, the interface will let you know. To unlock disabled iPhone without iTunes, just click on the “Unlock Now” button.

    start to unlock iphone

    Confirm your choice by entering the displayed code. Make sure that the process will automatically update your phone and erase the existing data as well as the saved settings.

    In no time, your iPhone would reset and will be restarted in the normal mode. As the process would be successfully completed, you will be notified. You can now remove your device and use it freely.

    disabled iphone unlocked successfully

    In this way, you can learn how to undisable an iPhone without iTunes in no time.

    Part 2. How to Reset disabled iPhone without iTunes using Find My iPhone

    If you have previously enabled the Find my iPhone service on your device, then you can also use it to reset your iPhone. In order to learn how to restore iPhone without iTunes when disabled, you can simply go to iCloud’s website. This will let you access the Find my iPhone service remotely from any other device or computer.

    Though, you need to make sure that you have the Apple ID and password of the account linked to the target device beforehand. Later, you can follow these steps to learn how to reset disabled iPhone without iTunes.

      1. Go to the official website of iCloud on any computer or device (a trusted source) and log in to the same account that is linked to your iPhone.
      2. Visit the “Find my iPhone” service from the home page of iCloud. Here, you can switch between different devices linked to the iCloud account.

    unlock disabled iphone using find my iphone

      1. Click on the “All Devices” section and simply select your iPhone from the list.

    erase disabled iphone

      1. This will automatically locate your device and provide different actions to play sound, lost mode, erase, etc. Select the “Erase iPhone” option.

    erase disabled iphone

    1. Confirm your choice by entering the account password again and answering the security question to erase your phone remotely.

    This will entirely reset your device and erase its existing content. Later, your phone would be restarted like brand new. Though, the only drawback of this method is that you need to know the iCloud account credentials as well as the security question crack. Also, the Find my iPhone service should be turned on beforehand. Therefore, if you are trying to unlock someone else’s phone, then this method might not work.

    Part 3. Can I Unlock Disabled iPhone without Losing Data?

    This is something that a lot of people ask us. Sadly, you can’t unlock a disabled iPhone without resetting it. Unlike Android, Apple doesn’t provide its users this facility. While unlocking a disabled iPhone, its existing data and saved settings would be lost. Therefore, you would have to set up your iPhone again in the end. If you want, you can choose to restore it from an iTunes or iCloud backup. The catch is when users connect their iPhone to iTunes to back up their data it usually resets the device (since the device is synced to iTunes beforehand).

    Therefore, if you wish to perform an iPhone disabled fix without iTunes, then simply give dr.fone – Screen Unlock (iOS) a try. By simply following the on-screen instructions, you would be able to unlock disabled iPhone without iTunes. Now when you know how to unlock a disabled iPhone without iTunes, you can easily access your phone again. If you have a friend who is going through the same situation, then feel free to share this guide with them as well.

    See a Comprehensive Guide on Removing Lock Screen on iPhone and Fixing disabled iPhone here.

    How to Unlock a Disabled iPhone without iTunes [Step by Step]
  • How to undisable an iPhone?

    Way 1: Using iTunes to Undisable An iPhone If your iPhone is disabled and you want to fix it then you need to connect the device to iTunes immediately. If the data of your iPhone has already been backed up then you will be able to easily fix the device. So, here’s how to undisable iPhone if the iPhone can connect to iTunes:

    by Jenefey Aaron   Updated on 2021-12-17 / Update for  Unlock iPhone

    Every iPhone 13 user always use a password to protect the important data in their device. But what if you put the wrong code and the iPhone gets disabled or due to some unforeseen glitch the password feature gets stuck? So “How to undisable an iPhone?”

    how to undisable an iphone
    how to undisable an iPhone

    It may look like an impossible task and you will take the device to the nearest Apple store. As a responsible company, Apple has foreseen such problems and provided official solutions. And there are also quicker and more effective way to answer how to undisable an iPhone.

    If you are wondering how to undisable an iPhone, then Tenorshare 4uKey is the best choice. It is convenient, eay-to-use, and overall very effective as a well-designed unlocker tool for iOS devices. It supports the latest iPhone 13 series and compatible both Windows PC and Mac. Here’s how to use it:

    • After installation, launch the 4uKey and then connect your iPhone and computer with a USB cable.

      connect disabled iphone
    • Then, the main interface of the tool will be visible, click on “Start”.

    • After that, download the latest iOS 15.2 firmware package.

      download firmware
    • After the firmware has been downloaded, click on “Unlock Now” to undisable your iPhone.

      unlock iphone without passcode

    After the iPhone is undisabled, you can restore data from backup if you have any. Using Tenorshare 4uKey. Never worry about a disabled iPhone or iPad or how to unlock a disabled iPhone without iTunes.

    If you are wondering how to undisable an iPhone using the official ways, then it would include using iTunes, iCloud and Apple ID. They were designed by Apple to provide undivided support to iOS users.

    Way 1: Using iTunes to Undisable An iPhone

    In such cases where your iPhone is disabled, the most popular option is to connect the device to iTunes. If the data of your iPhone has already been backed up then you will be able to easily fix the device.

    So, here’s how to undisable an iPhone if the iPhone can connect to iTunes:

    • Start the procedure by connecting the device to your computer using a USB cable and launch iTunes.
    • Tap the iPhone icon on the top. Then click on “Restore iPhone” option under Summary tab.
    • Finally click “Restore and Update” and iTunes will now download the software and restore your iPhone.

      restore and update iphone

    Now, your iPhone will be fixed. But if you were unable to connect to iTunes, then how to undisable an iPhone? Put your iPhone into recovery mode.

    • iPhone 6/6s and earlier: Power button and Home button together.
    • iPhone 7 and iPhone 7 Plus: Volume down button and Power button
    • iPhone 8 to iPhone 13: Quickly press Volume up button, then press the Volume down button. Long hold the Side button.

    Then connect the device to your computer with a data cable and open iTunes.

    After iTunes detection, you will see another prompt: “There is a problem with iPhone that requires it to be updated or restored”. Click on Restore.

    itunes recovery mode update

    Way 2: Utilize iCloud to Unlock Disabled iPhone Remotly

    How to undisable an iPhone without iTunes? Well, iCloud is an alternative to unlock iPhone without iTunes. If you remember your Apple ID and the login password, then you can visit iCloud.com to unlock your device remotly. Find My should be enabled. The steps are mentioned below:

    • Go to the official website of icloud.com. Then log in to your account.

      login icloud
    • Now, you need to go to options and select “Find My iPhone”.
    • CLick “All Devices” one the top of the window and choose your iPhone from the list.

      select device
    • After that click on “Erase iPhone”, then all of your data and settings will be erased from the device.

      erase iphone
    • This procedure will completely erase all the data on your device. So, you better save a backup beforehand so that you can restore after your device gets fixed.

    Way 3: Using Apple ID to Undisable An iPhone

    Using Apple ID is the only method by now for how to unlock disabled iPhone without computer, but it is limited to iPhone with the new iOS 15.2. If you find your iPhone is unavailable or security lockout, you can erase the device and access your iPhone again.

    This solution is a bit experimental and tricky. It is only available to some iOS 10 devices, and there is a chance that it may not work every time. You can call this method more of a trick as you have to trick Siri to make this method effective and in the process you will not lose your iPhone data.

    So, how to undisable an iPhone without iTunes using Siri, you will find the steps below,

    • First you have to activate the Siri on your iPhone. So, press and hold the Home button. After that Siri will be activated immediately and it will respond to your voice.
    • Ask Siri to open the clock of your iPhone.
    • Hit the “Clock” icon, to find the World Clock.
    • Now, click “ ” sign to add another clock to the list.

      add clock
    • Type anything on the search bar and then select all of it.
    • Select the “Share” option.

      select message
    • Select “Message” to open a new Message window.

      share message
    • Inside the message field, navigate to “To” and press and hold the “Paste” button to paste the copied message.

      paste message
    • Now, tap on the Home button to reach the main screen of the device.

    Finally, you will see that you can access your device without using the password. This simple trick will save you from going through all of the troubles to undisable your iPhone but remember that, this particular procedure may not work all the time.

    How to undisable an iPhone? We can assure you that the official ways are strong enough to fix your disabled iPhone but there are drawbacks. So, if you want to get your iPhone back without facing terrible consequences, use Tenorshare 4uKey. It is simply the best and the most effective method. Highly recommended!

    How to Undisable an iPhone with 4 Simple Ways(iPhone 12 ...
fonepaw.com

Solution 3: iPhone is Disabled, How to Fix Without iTunes? 1. Get iOS System Recovery on PC/Mac. Click the following button to get the program on your PC/Mac and move to the "iOS... 2. Detect iPhone/iPad. When you connect the device into the PC, the program will …

Your iPhone is locked when you see on the lock screen this message: iPhone is disabled. In some cases, the message says: "iPhone is disabled, try again in 1/5/15/60 minutes." And some people even see the crazy "iPhone is disabled for 24 million minutes"! And in other cases, you see "iPhone is disabled, connect to iTunes." So why is your iPhone disabled? And how to unlock disabled iPhone 12/11/X/8/7/6 so that you can access to your phone again. Here are the answers.

iOS System Recovery (opens new window) to fix your iPhone/iPad's disabled error.

Note: This method works for those who don't need the data anymore since it may erase your phone contents.

1. Get iOS System Recovery on PC/Mac

Click the following button to get the program on your PC/Mac and move to the "iOS System Recovery" interface.

2. Detect iPhone/iPad

When you connect the device into the PC, the program will detect it with ease. Thus, click "Advanced mode" to fix the disabled iPhone.

404 image

3. Put Your Device into DFU Mode

To get started in this way, it is in need to get your iPhone into DFU mode so that the program will go on fixing your case.

404 image

4. Select Device's Info

After detecting, the program will show your device information. Double-check the details and confirm whether it is correct. Once it shows any wrong info, please select it manually.

404 image

Tip: There is a guide for you to check the model details if you click the question mark next to the "Device model".

5. Fixing Your iPhone Back to Normal Status.

In this step, you have to keep the mobile connected to the computer. The screen will display the repairing process. As "Repair completed" comes, you can now access your iPhone

404 image

Fone Paw iOS Unlocker (opens new window) is also a good way to try. It is a new program that focuses on wiping the locked iPhone passcode, removing Apple ID (opens new window), and retrieving Screen Time passcode.

It helps you unlock the disabled iPhone so quickly and safely that you will be surprised at how convenient it is.

First, download FonePaw iOS Unlocker (opens new window)on your computer.

Second, enable the program and you will see three options on the homepage.

Wipe Screen helps you get into the disabled iPhone quickly.

Remove Apple allows you to reset the Apple ID or log in with a new account.

Screen Time enables you to retrieve the Screen Time and Restrictions passcode.

404 image

Third, tap Wipe Passcode and connect your iPhone to the computer. Check if the information of your device is correct and click Start to continue.

It will begin downloading a firmware package for your device.

404 image

Fourth, when the firmware package is downloaded, a prompt will ask you to enter "0000" to confirm the unlocking.

404 image

Enter it and click Unlock to continue. When the progress goes to 20%, you will need to put your phone into Recovery Mode to continue.

The program will show you detailed instructions to teach you how to do. So you don't need to worry about the process.

404 image

Finally, when your phone enters Recovery mode, the process will go on. Wait till it finishes and your disabled iPhone will be unlocked successfully.

404 image

Notice:

Although FonePaw iOS Unlocker (opens new window) is a fast way to unlock the disabled iPhone, there are several things that you should keep in mind before using it:

  1. You will need to register before unlocking.

  2. Removing the lock screen will erase the data and settings on your device as well.

  3. You'd better turn off Find My iPhone before unlocking. If it is enabled, you will need to enter the iCloud password to reset your device after the unlocking.

  4. Your device will be updated to the latest iOS version after the unlocking.

backup your iPhone with iTunes or iCloud (opens new window).

3 Ways to Unlock a Disabled iPhone

This wikiHow teaches you how to remove the "iPhone is Disabled" lock, which occurs after entering incorrectly the passcode several times, from your iPhone. While your iPhone will usually remove the…

  1. 1

    Attach your iPhone to your computer. Plug the charging end of your iPhone's charger cable into your iPhone, then plug the USB end of the cable into your computer.

    • If you use a Mac, you may need to buy a USB 3.0 to Thunderbolt adapter in order to connect the cable.
  2. 2

    Open iTunes. Its app icon resembles a multicolored musical note on a white background.

    Advertisement

  3. 3

    Click your iPhone's icon. It's the iPhone-shaped icon that's in the upper-left side of the iTunes window.

  4. 4

    Click Restore iPhone…. This is in the upper-right side of the page.

    • If your iPhone's Find My iPhone feature is turned on, you'll be prompted to turn it off before proceeding. Since you can't disable Find My iPhone while your iPhone is disabled, try using iCloud to erase your iPhone instead.
  5. 5

    Click Restore when prompted. Doing so will prompt your iPhone to begin restoring to factory settings.

    • You may need to enter a password before proceeding.
  6. 6

    Wait for the restore to finish. This should only take a few minutes, though it may take longer if your iPhone needs to be updated. Once the restore completes, your iPhone's "Disabled" protection should be unlocked, and your passcode will be gone.[1]

  7. 7

    Restore a backup if needed. If you have a backup of your iPhone stored in iTunes or iCloud, you can restore your iPhone's settings, photos, apps, and so on.
    • If your iPhone has an activation lock on it, you'll need to enter your Apple ID email address and password in order to restore a backup in iTunes.
    • If you don't have a backup available, you'll need to set up your iPhone as a new iPhone.

    Advertisement

  1. 1

    Make sure that you have Find My iPhone enabled. If you turned off Find My iPhone at any point and didn't turn it back on, you won't be able to use this method. Try using iTunes or using Recovery Mode instead.[2]
  2. 2

    Open your iCloud page. Go to https://www.icloud.com/ in your browser, then log in by entering your Apple ID email address and password if prompted. This will bring up your iCloud dashboard.
  3. 3

    Click Find iPhone. It's a green radar icon at the bottom of the dashboard. Doing so causes iCloud to begin trying to find your iPhone.

    • You may have to re-enter your Apple ID password here before continuing.
  4. 4

    Click All Devices. This is a green tab at the top of the window. A drop-down menu will appear.

  5. 5

    Select your iPhone. Click your iPhone's name in the drop-down menu. You should see the iPhone's page open on the right side of the window.

    • If you can't see your iPhone's name here, Find My iPhone isn't enabled on your iPhone.
  6. 6

    Click Erase iPhone. It's in the bottom-right corner of the iPhone's page.

  7. 7

    Click Erase when prompted. Doing so will bring up a password field.

  8. 8

    Enter your Apple ID password. In the password field, type in the Apple ID password for the iPhone that you're trying to erase.

  9. 9

    Click Next. It's in the upper-right corner of the iPhone's page that's in the top-right side of the window.

  10. 10

    Click Done. This green button is in the upper-right side of the iPhone's page. Doing so prompts your iPhone to begin erasing.

  11. 11

    Wait for your iPhone to finish erasing. The erasing process will usually only take a few minutes. Once you see various languages' versions of "Hello" flashing across your iPhone's screen, you may proceed.

  12. 12

    Restore a backup if needed. If you have a backup of your iPhone stored in iTunes or iCloud, you can restore your iPhone's settings, photos, apps, and so on.
    • If your iPhone has an activation lock on it, you'll need to enter your Apple ID email address and password in order to restore a backup in iTunes.
    • If you don't have a backup available, you'll need to set up your iPhone as a new iPhone.

    Advertisement

  1. 1

    Understand when to use Recovery Mode. Recovery Mode allows you to use iTunes to reset your iPhone on a computer on which you've never used your iPhone. If you can't use iTunes to restore your iPhone and your iCloud account doesn't have Find My iPhone enabled, you'll need to use Recovery Mode.

  2. 2

    Close iTunes if it's open. This is important for enabling Recovery Mode, as leaving iTunes open and then placing your iPhone in Recovery Mode will result in an error.

  3. 3

    Attach your iPhone to your computer. Plug the charging end of your iPhone's charger cable into your iPhone, then plug the USB end of the cable into your computer.

    • If you use a Mac, you may need to buy a USB 3.0 to Thunderbolt adapter in order to connect the cable.
    • If iTunes opens, close it before proceeding.
  4. 4

    Place your iPhone in Recovery Mode. For an iPhone 8 or higher, you'll press quickly the Volume Up button, press quickly the Volume Down button, and then press and hold the Power button until you see the "Connect to iTunes" message—which resembles a power cable and the iTunes logo—appear on your iPhone's screen.[3]

    • For an iPhone 7, press and hold both the Volume Down button and the Power button until you see the "Connect to iTunes" message.
    • For an iPhone 6S or lower, press and hold both the Power button and the Home button until you see the "Connect to iTunes" message.
  5. 5

    Open iTunes. Its app icon resembles a multicolored musical note on a white background. iTunes should open to the Recovery Mode page.

  6. 6

    Click Restore iPhone…. This is at the top of the window.

  7. 7

    Click Restore when prompted. Your iPhone will begin restoring to factory settings.

    • You may have to enter your Apple ID password here.
  8. 8

    Wait for the iPhone to finish erasing. This will usually only take a few minutes, though it may take longer if your iPhone needs to be updated.

  9. 9

    Restore a backup if needed. If you have a backup available on a different computer or in iCloud, you can restore your iPhone's information via the backup.
    • If your iPhone has an activation lock on it, you'll need to enter your Apple ID email address and password in order to restore a backup in iTunes.
    • If you don't have a backup available, you'll need to set up your iPhone as a new iPhone.

    Advertisement

Add New Question
  • Question

    How do I unlock my iPhone without erasing it?

    Community Answer

    You cannot unlock your iPhone without erasing it.

  • Question

    Why is it not letting me sync my iPhone?

    Al Poley

    Make sure that your iTunes account on your PC is authorizing your phone. It may be that you can only have 5 at a time.

  • Question

    What do I do if it is asking for a password, shows all the device parts, and the "hello" is not showing?

    Community Answer

    Using Recovery Mode means there's no need for a password. If you don't have a password, you can use the third method in the article. You can also use Eelphone iPhone Unlock.

  • Question

    My BFF's phone is disabled, but she doesn't have a computer. How does she unlock her phone?

    Community Answer

    Have your friend take it to the Apple store and ask someone at the genius bar to help her.

  • Question

    What can I do if I forgot my password and don't have iTunes?

    LisaLisa12

    In addition to iTunes, you can also use iCloud to unlock: Use other settings to access iCloud.com/find>Sign in to Apple ID> "Find My iPhone"> All Devices> Select Locked iPhone> Select "Erase iPhone"> Unlock iPhone successfully> Backup and restore.

  • Question

    My iPhone is disabled and asks for a passcode number. How do I unlock it?

    Community Answer

    Connect to iTunes to restore it or put it into recovery mode and then use iTunes to restore it. If iTunes cannot recognize the iPhone, you can try a passcode unlocker. Such a tool can unlock any disabled iOS device without a passcode.

  • Question

    After the disabled timer, can I use the iPhone without having to unlock it?

    Community Answer

    If you forgot your passcode, you have to use iTunes or recovery mode. There's no way to get all the data from your iPhone when you erase it, unless you have a backup.

Ask a Question


Advertisement

  • Thanks!
  • Thanks!

Advertisement

  • Thanks!

Advertisement

JL

This article was written by Jack Lloyd. Jack Lloyd is a Technology Writer and Editor for wikiHow. He has over two years of experience writing and editing technology-related articles. He is technology enthusiast and an English teacher. This article has been viewed 177,752 times.

Co-authors: 8

Updated: August 20, 2020

Views: 177,752

Categories: IPhone

  • Print
  • Send fan mail to authors
Thanks to all authors for creating a page that has been read 177,752 times.
  • Gina Smith

    "Logging into my iCloud was a simple way to unlock my iPhone."

Share your story
3 Quick Ways to Undisable Your iPhone 12/11/Xs/Xr/X

That is how you fix a disabled iPhone using iTunes. Method 3. Remove Passcode from Disabled iPhone Easily. If you are in a situation where your iPhone is disabled and you cannot afford to lose your files, your best option is not to use the iTunes app but use a …

Author AvatarJoy Taylor Last Updated: Aug. 17, 2021

Apple has equipped its iPhones with a number of security features, including forgot passcode and connect to iTunes to reset locked iPhone. These features ensure that only you or unauthorized users can access the contents of your device. It can lock your device and ensure the safety of your data.

However, many users reported that their iPhone 11/iPhone 11 Pro Max got the “iPhone is disabled” message on the lock screen, which says iPhone is disabled connect to iTunes or iPhone is disabled try again in xx minutes. It basically means security feature ever gets triggered and your iPhone has been disabled and that you cannot unlock your iPhone normally. Then, how can we get iPhone out of disabled mode?

The following guide explains why the iPhone disabled message appears on your device, and how can you fix your disabled iPhone 11. Now, keep reading the following contents and pick the best way to unlock a disabled iPhone without iTunes or with it and fix the issue iPhone 11 disabled connect to iTunes, or iPhone 11 Pro Max disabled connect to iTunes.

Why is My iPhone Disabled?

If it is not you who has caused the error, then the first thing you will want to know is why the error came up on your device in the first place. This section answers just that for you.

An iPhone 11/11 Pro Max is usually disabled when an incorrect passcode is entered too many times. What that means either you or someone with access to your iPhone has entered the wrong passcode multiple times on your device.

How to Undisable Your iPhone

How to Undisable Your iPhone

When an incorrect passcode is entered multiple times, your iPhone thinks that it is an unauthorized user trying to access your data. In order to protect the data, your iPhone disables the entire system and so you get an error message on your screen saying your device is disabled.

For some users, it may be a genuine action trying to unlock their iPhone after a long time. Your iPhone does not think of it that way and it considers each and every failed attempt to unlock the phone as someone trying to steal your data.

If you do not remember who did it, it may be that the wrong passcode got entered while your phone was in your pocket. It is easy for the on-screen options on your iPhone to get touched and this may be a possible reason.

Also Read: Can a Stolen iPhone be Unlocked and Used?

How to Remove Passcode from the Disabled iPhone

If you have found yourself in a situation where your iPhone only shows the disabled message and nothing else, you might want to find a way to quickly undisable your iPhone. Fortunately, there are a couple of ways to get around the issue and start using your iPhone like before. The disabled message on your iPhone can indeed be removed and fixed without much hassle. Read the following tips to fix disabled iPhone 11/11 Pro/11 Pro Max.

Method 1. Unlock a Disabled iPhone with an iPhone Password Unlocker

To get your iPhone out of disabled mode, you need to unlock the passcode. Here is an iPhone password unlocker – AnyUnlock, which is a phone unlocking tool that can remove Apple ID, iPhone passcode, Screen Time passcode, etc. You can first use AnyUnlock to unlock iPhone because iPhone is disabled and won’t connect to iTunes usually.

With AnyUnlock, you can unlock iPhone passcode with computer easily and quickly. You can remove the passcode including 4-digit and 6-digit passcode, Touch ID, and Face ID, and unlock the disabled iPhone within simple steps. No tech knowledge is required.

1. After you unlock screen passcode, all the device data will be erased and the iOS system will be updated to the latest iOS version supported by your device.

2. If Find My iPhone is turned on on your device, after removing the password, you need to enter the iCloud account and password to set up your device.

Here’s how to do it:

Step 1. Get AnyUnlock installed on your computer > Launch it and tap on Unlock Screen Passcode.

Choose Unlock Screen Passcode

Choose Unlock Screen Passcode

Step 2. Connect your disabled iPhone via USB cable > Click the Start button to continue. (If your device is not recognized, follow the on-screen instructions to make your device enter Recovery Mode first.)

Tap Start Button

Tap Start Button

Step 3. Click the Download button to get the matching firmware for your device. 

Download iOS Firmware

Download iOS Firmware

Step 4. Once the firmware downloaded, tap on the Unlock Now button on the screen.

Tap on Unlock Now to Remove Screen Passcode

Tap on Unlock Now to Remove Screen Passcode

Step 5. AnyUnlock will start removing the screen passcode. Wait fominutes, the disabled iPhone will be unlocked successfully. And you can enter the home screen and use it.

Screen Passcode Removed Successfully

Screen Passcode Removed Successfully

Video Tutorial on How to Unlock iPhone Passcode if you Forgot:

The standard and the official way to undisable an iPhone is to use the iTunes app. With iTunes, you can restore your iPhone and that will remove the disabled error message from your device.

This method requires you to have the latest version of iTunes installed on your computer. Also, keep in mind that this will erase all the data stored on your device. What that means is all of your files including your photos, videos, apps, and everything else will be deleted from your iPhone.

If you are happy to proceed, the following should teach you to undisable your iPhone using the iTunes app.

Step 1. Connect your iPhone to your computer using a compatible cable.

Step 2. Launch the latest version of iTunes using your preferred way on your computer.

Step 3. iTunes will recognize your device and you will see a device icon on the interface. Click on the icon and then click on the Summary tab in the left sidebar.

Step 4. On the following screen, you will find a button that says Restore iPhone on the right-hand side pane. Click on the button to restore your device using iTunes.

Unlock Disabled iPhone via iTunes

Unlock Disabled iPhone via iTunes

Allow for your iPhone to be restored using iTunes. When it is done, your iPhone will boot up normally and you will no longer have the disabled message on your device’s screen. That is how you fix a disabled iPhone using iTunes.

Method 3. Remove Passcode from Disabled iPhone Easily

If you are in a situation where your iPhone is disabled and you cannot afford to lose your files, your best option is not to use the iTunes app but use a third-party app to undisable your iPhone.

PhoneRescue for iOS, as professional data recovery software, could fix the disabled iPhone without just a few clicks. It has a feature that allows you to get rid of the lock screen passcode from your device. Once that is removed, your iPhone then gets undisabled and you can use it as you did before.

The following shows how you can use the app to get around the disabled iPhone issue on your device.

Step 1. Download PhoneRescue for iOS and install it on your computer.

Step 2. Launch it and click Device Rescuer. Then, select Remove Lock Screen Passcode and click on the Next button.

Choose the Remove Lock Screen Passcode Option

Choose the Remove Lock Screen Passcode Option

Step 3. Plug in your iPhone or iPad to your computer and enter the recovery mode.

Remove Screen Lock Passcode-Recovery

Remove Screen Lock Passcode-Recovery

Step 4. You will be asked to enter the details of your device. Use the dropdown menus available on your screen to specify your iPad model and then click on the Download button to continue.

Remove Screen Lock Passcode-Download Firmware

Remove Screen Lock Passcode-Download Firmware

Step 5. When the firmware is downloaded, it will be applied to your iPad and start removing the lock screen. You will get the following message on your screen when the passcode is removed from your device.

Remove the Lock Screen Passcode Successfully

Remove the Lock Screen Passcode Successfully

You have now regained access to your iPhone and your iPhone is no longer disabled.

The Bottom Line

Undisabling an iPhone is not as difficult as you might think. In fact, there are multiple ways to do the task both with and without data loss. You can go ahead with the one that you think is convenient for you and get your iPhone fixed. And AnyUnlock is the best way to unlock iPhone passcode with computer and get the iPhone out of disabled mode. If you have encountered this issue and could not fix it with the above methods, you may leave your message in the comment part.

iPhone is Disabled? How to Unlock iPhone/iPad

How to Unlock iPhone/iPad. If playback doesn't begin shortly, try restarting your device. Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this ...

4 Easy Ways to Fix "How to Undisable iPhone"(Bonus Included)

25-10-2021 · 4. If Find My iPhone/iPad is turned on, you’ll need to input your iCloud password to set up your device after unlocking it. Now, use your USB cable to connect your iPhone to your computer and click “Next”. At this point Keypass will begin detection and loading of your device data.

25-10-2021

Many iPhone users complained that the “iPhone is disabled” notification appeared on the lock screen of their iPhone 6/7/8/xr/11/12/13, with the message “iPhone is disabled connect to iTunes or iPhone is disabled try again in xx minutes.” It simply implies that if your iPhone’s security function is ever triggered, it will be disabled and you will be unable to unlock it normally.

how to undisable iphone

Ever struggled with the “iPhone has been disabled” message and are quite tired of seeing it? Well, we’re here to help you out. Read on!

Why Did Your iPhone Get Disabled?

1.Your iPhones come with certain security measures (courtesy of Apple Inc.) that are meant to protect your privacy and keep your data safe.

2.These features are meant to prevent unauthorized people from accessing your phone and locking your device. For security reasons, an iPhone is disabled.

3.Otherwise, a hacker might attempt every conceivable combination until they got into your phone.

4.An iPhone/iPad could become disabled if kids mess with it and get locked out.

How Your iPhone Get Disabled?

When you input an erroneous passcode several times, your iPhone assumes it’s an unauthorized user attempting to access your data. Your iPhone disables the entire system to secure the data, resulting in an error message on your screen stating that your device is disabled.

6 Times Failed PasscodeDisabled for 1 min
7 Times Failed Passcode Disabled for 5 min
8 Times Failed Passcode Disabled for 15 min
10 Times Failed Passcode Disabled for 1 hour
Over 10 Times Failed Passcode iPhone is Disabled

If your iPhone is locked down after ten failed attempts to enter your passcode, there’s another possibility: you may have programmed your iPhone to wipe itself after those ten failed attempts. While this is a great security feature in the event of a lost iPhone, it might be aggravating if you haven’t backed up your account in a long time.

If you find yourself with a disabled iPhone, there are a few options for getting your smartphone working again. If you’ve recently backed up your iPhone to iCloud or iTunes, these recovery procedures will be the most effective. You’ll certainly lose some of your data if you don’t follow these procedures, but it’s still worth it to get your iPhone running again. So, how to undisable an iPhone?

There are a few methods with which this can be achieved. We’ll look at a few of them in this article and show you how to go about the process.

Unlock a Disabled iPhone with StarzSoft KeyPass (100% Work & Safe)

To undisable iPhone, third-party apps usually come in handy and none so more than StarzSoft KeyPass.

05_keyPass.png
  • It can bypass iPhone lock screen without previous owner or password
  • It ensures 100% success rate for you to unlock your iPhone/iPad/iPod touch
  • Fast & easy to unlock your iPhone, no tech required
  • Supports all versions of iOS & iPad OS
  • Free trial is available for you!
Free Download 100% Clean & Safe

Starzsoft KeyPass helps you do this on your iPhone in three steps.

Step 1: Download and launch StarzSoft KeyPass

On your PC, download and install StarzSoft KeyPass and launch it once completed. After launch, two modes will be presented to you, select “Unlock Screen Passcode” mode, and after, select “start”. Take note of the following:

keypass new interface

Please be warned that :

1. After unlocking your device, all of your data will be wiped.

2. The iOS version will be upgraded to the most recent version.

3. Make sure your gadget has enough battery life.

4. If Find My iPhone/iPad is turned on, you’ll need to input your iCloud password to set up your device after unlocking it.

Now, use your USB cable to connect your iPhone to your computer and click “Next”. At this point Keypass will begin detection and loading of your device data.

keypass connect idevice

Step 2: Verify and Download Firmware Package

Here, you’ll be asked to verify your device information and then proceed to download the firmware package as given by the app.

keypass download firmware

Select “Download” to continue. While this might take a little while, make sure your iPhone remains connected to your computer through this process. Once the download is complete, the firmware package is immediately verified In just a matter of seconds.

Step 3: Begin Process to Unlock Passcode

After verification is complete, you get a message saying “Firmware is ready”; click continue to proceed. A pop-up notice will come up. Read the notice carefully, enter “1111” as the four-digit passcode and click confirm. Your smartphone will be unlocked by KeyPass.

keypass confirm unlock

Please use a USB cable to connect your gadget to your computer. Your disabled device’s passcode/Touch ID/Face ID will be deleted in a matter of minutes.

keypass unlock successfully

Congratulations! Your iPhone has been unlocked.

Further Reading: [Solved] How to Bypass Apple Activation Lock on iPhone or iPad

How to Undisable iPhone Using iTunes

The iTunes app is the normal and certified way to restore an iPhone’s functionality. You can restore your iPhone using iTunes, which will clear the disabled error message from your device.

You must have the most recent version of iTunes installed on your computer to use this procedure. Keep in mind that this will wipe out all of the data on your smartphone. That means all of your stuff on your iPhone, including photos, videos, apps, and anything else, will be erased. If you’re ready to go, the steps below should show you how to disable your iPhone using the iTunes app.

Step 1: Using an appropriate cable, connect your iPhone to your computer.

Step 2: On your computer, open the most recent version of iTunes using your favorite method.

Step 3: iTunes will detect your device and a device icon will appear on the UI. After clicking the icon, go to the left sidebar and select the Summary tab.

undisable iphone 12 using itunes

Step 4: On the next screen, on the right-hand side pane, you’ll see a button that says Restore iPhone. To restore your device using iTunes, click the button.

restore iphone

Allow for an iTunes restore of your iPhone. When it’s finished, your iPhone will restart properly, and the disabled message will no longer appear on the screen. That’s how you use iTunes to restore a disabled iPhone.

How to Undisable iPhone Using iCloud

If your iPhone’s iCloud service is enabled, you can also utilize this Apple service to recover a disabled iPhone. Follow the procedures indicated below to discover how to recover a disabled iPhone using iCloud:

Step 1: Open a web browser on your computer and go to iCloud.com. Use your Apple ID and password to log in.

Step 2: Select “All Devices” from the “Find My iPhone” menu.

undisable iphone using icloud

Step 3: From the list of devices, choose the disabled device. Confirm that you want to “Erase iPhone

erase iphone

It will remove all data from your iPhone. You can restore the iPhone from your iCloud backup after the erase is complete.

How to Undisable iPhone Using the Recovery Mode

If the iTunes and iCloud methods don’t work for you, fret not, there’s still one more method you could employ, the recovery method. This is advisable if your computer doesn’t recognize your iPhone or says it’s in recovery mode. Follow the following steps.

Step1: Plug your iPhone into your computer using an appropriate USB cable. If it doesn’t open automatically, launch iTunes manually. If your Mac is updated to Catalina, open Finder.

iphone recovery mode

Step2: At this point, depending on the model of your iPhone, force-restart your phone.

Step3: Once it enters recovery mode, locate your device on iTunes or Finder and select it.

Step4: You’ll get a pop-up asking you if you want to restore or update. Select “Restore”.

restore iphone 13 in recovery mode

After your device has been restored, it’ll start up as a new iPhone. Follow the set-up process and prompted and when asked to recover your backup, choose the latest backup you have. It could be from your iTunes, iCloud or Finder.

To force restart your iPhone, follow the steps below as applies to your device:

For iPhone 8, iPhone 8 Plus, SE (2020), and iPhone X and subsequent models: To access the power off slider, press and hold the side button and one of the volume buttons at the same time. With the slider, turn off your gadget. While holding the side button, connect your gadget to your computer. Hold the side button down until your phone displays the recovery mode screen.

For iPhone 7 and 7 Plus. Press and hold the side (or top) button until the power off slider displays. With the slider, turn off your gadget. Hold the volume down button while connecting your gadget to your computer. Hold the volume down button until your phone displays the recovery mode screen.

For the iPhone 6s or before. Press and hold the side (or top) button until the power off slider displays on Turn your device off. While holding the home button, connect your device to your computer. Hold the home button down until your phone displays the recovery mode screen.

With these few methods, you now have various ways to deal with this pesky issue of how to undisable an iPhone.

Bonus: How To Avoid Disabling Your iPhone (Coupon Included)

Having an iPhone that isn’t working isn’t fun. Here’s how you can prevent that from happening again.

Tip1: Create a new passcode as follows: Paul Wagenseil, the security editor of Tom’s Guide, suggests using a 6-digit passcode generated by a random number generator.

Tip2: Memorize the number and write it down on a piece of paper in a secure location. In the Touch ID & Passcode section of Settings, you can update your passcode.

Tip3: Use Touch ID or Face ID: You’ll need an iPhone with a fingerprint reader (from the iPhone 5s to the iPhone 8 Plus) or an iPhone X or later that supports face recognition to use this technique. You should still establish a passcode as a backup in case your fingerprint can’t be read.

Coupon Code for StarzSoft KeyPass: 10OFF-KP.(Available in 2021)

Conclusion

For any of your iPhone 5/6/7/8/xr/11/12/13, hope this guide will help you solve the problem ” How to undisable the iPhone”.

Among the unlock iPhone/iPad tool, StarzSoft is easy & safe to use, one-stop to unlock your 4/6 digits code, face id, touch id even remove your apple id. Let’s get a try!

fonelab.com

If you want to unlock an disabled iPhone, you can read below steps which are similar to tutorial of how to unlock disabled with iTunes as below. Step 1 First of all, disconnect iPhone from Mac and put iPhone into recovery mode. There are a bit difference according to iPhone models, please check the above-mentioned demonstration. Step 2 Choose your device from left panel under Locations tab ...

404 imageUpdated by Boey Wong / July 22, 2021 16:30

I got an iPhone 7 yesterday, and I set up a new unlock passcode that I couldn’t remember the exact code after that. After I tried several times to enter the password, my iPhone is disabled now. please help, is there a way to unlock disabled iPhone?

Unfortunately,

If you forgot iPhone passcode, there is no reasonable workaround to gain access to it again. If you have not backed up data on locked iPhone, you may lose them.

404 image

But you still have several opportunities to guess and try as iPhone won’t become disabled on the first or second wrong passcode attempt.

Here is how many times you can enter an incorrect password before your iPhone is disabled:

Take a deep breathe and think carefully what the most possible unlock password will be.

  • 1-5 incorrect passcode entries in a row – No problem.
  • 6 incorrect entries in a row – iPhone deactivated for 1 minute.
  • 7 times wrong attempts – iPhone disabled for 5 minutes.
  • 8 incorrect attempts – iPhone can’t be used for 15 minutes.
  • 9 times wrong tabs – iPhone disabled for 60 minutes.
  • 10 times incorrect attempts in a row – You will get iPhone is disabled. Connect to iTunes or the phone will completely erase itself for all data if Erase Data is enabled on the device.
404 image

Well, though you can’t unlock a disabled iPhone, you are able to erase and restore data from locked iPhone from the last backup you made previously.

Part 1. How to Unlock Disabled iPhone with iTunes

You can use iTunes to restore your iPhone from the most recent backup if you have.

Step 1Connect your iPhone to the computer you synced with.

Step 2Launch iTunes if it doesn’t open automatically. If asked for a passcode, put the iPhone in recovery mode.

Note:

iPhone X or later, iPhone SE (2nd generation), iPhone 8, and iPhone 8 Plus: Turn off iPhone, holding power button and and connect iPhone to Mac at the same time, holding the power button until you see the recovery mode screen on your iPhone screen.

iPhone 7 and iPhone 7 Plus: Power off iPhone, then holding Volume down and connect iPhone to Mac until you see the recovery mode screen.

iPhone SE (1st generation), and iPhone 6s and earlier: Turn off iPhone firstly. Holding home button and connect iPhone to Mac until you see the recovery mode screen.

You can learn how to put iPhone in recovery mode in details.

404 image

Step 1Once iTunes detects your device, click Restore iPhone….

404 image

Step 2When you reach the Set Up screen while restoring your device, select Restore from iTunes Backup. Choose the latest or the most relevant one to restore.

Part 2: How to Fix a Disabled iPhone throught Finder on Mac

As you might know, iTunes is not available on macOS after Catalina. Well, what to do if you are an iTunes fans? Is there any alternative?

Of course. Finder might be what you are looking for on Mac. If you want to unlock an disabled iPhone, you can read below steps which are similar to tutorial of how to unlock disabled with iTunes as below.

Step 1First of all, disconnect iPhone from Mac and put iPhone into recovery mode. There are a bit difference according to iPhone models, please check the above-mentioned demonstration.

Step 2Choose your device from left panel under Locations tab, you can see a pop-up window shows 3 buttons. Click Restore to restore iPhone.

404 image

It takes about 15mins to 1h. After it is finished, set up your iPhone as a new iPhone or restore iPhone from iCloud backup if you have one.

Part 3. How to Undisable an iPhone with iCloud

If you can't sync or connect with iTunes, use iCloud.

Step 1Go to iCloud website in your browser, then log in by entering your Apple ID and password. And click Find iPhone in the main menu.

Step 2Click All Devices and select your iPhone. Then you should see a window pop up at the right top. Select Erase iPhone in the window and confirm your selection.

Step 3Wait for your iPhone to finish erasing. Meanwhile, it will also disable its lock.  If you have a backup of your iPhone stored in iCloud, you can restore your iPhone's settings, photos, apps, and so on.

404 image

Please note that restoring from iTunes or iCloud backup will erase all your current data on the phone and it will be replaced by the data of the backup that you are restoring from. So if you don’t want to lose any data, best to use FoneLab iOS System Recovery to help you enable your iPhone.

However, there is no way to back up the current data on the deactivated device. So if you haven’t backed up your iPhone to iTunes or iCloud, you will lose all data on it after erasing.

Part 4. How to Fix a Disabled iPhone via iOS Unlocker

If you just forgot iPhone passcode, you can try iOS Unlocker to unlock iPhone without passcode. This is a workable method to remove iPhone passcode, and it will remove iPhone data in the meantime. You can move on to learn how to use it, or just jump to the next part and try another solution without losing data.

404 image
FoneLab iOS Unlocker

FoneLab Helps you unlock iPhone screen, Removes Apple ID or its password, Remove screen time or restriction passcode in seconds.

  • Helps you unlock iPhone screen.
  • Removes Apple ID or its password.
  • Remove screen time or restriction passcode in seconds.
Free Download Free Download Learn more

Step 1Download and install iOS Unlocker on your PC. Then open it.

Step 2You should plug iPhone to computer here. Then select Wipe Passcode. Of course you can also choose other features here accordingly.

404 image

Step 3Click Start, choose your iPhone information from the drop-down list and click Start button again.

404 image

Part 5. How to Fix a Disabled iPhone without Erasing

Is there a way that can fix the disabled iPhone without data loss? I am happy to tell you the answer is yes.

FoneLab iOS System Recovery, a powerful iOS system recovery software can fix with all kinds of iOS system problems like how to get out of recovery mode, how to fix black screen on iPhone, iPad white screen of death fix, iPhone red screen of death fix, iPhone 5s blue screen of death fix, how to fix a frozen iPhone, and more. Please check below simple tutorial about the recovery process.

Step 1Free download the software with below right link according to what operating system that your computer is running, and install it afterward.

404 image
FoneLab iOS System Recovery

FoneLab enables you to fix iPhone/iPad/iPod from DFU mode, recovery mode, Apple logo, headphone mode, etc. to normal state without data loss.

  • Fix disabled iOS system problems.
  • Extract data from disabled iOS devices without data loss.
  • It is safe and easy to use.
Free Download Free Download Learn more

Step 2Connect your iPhone with the computer via a USB cable. Choose iOS System Recovery after the software recognizes the device.

404 image

Step 3The software can detect the connected iPhone is in abnormal state and it will ask you to click the Start button to get started.

404 image

Step 4You will be asked you to confirm the information about your iPhone. Click Repair if it is correct, but if not, select the exact information manually before repair. It will take some time to download plug-in, please do not disconnect or use your device during the process. Otherwise, it may lead to the repair failure.

404 image

If you lost iPhone data after fixing iPhone errors, you can use FoneLab iPhone Data Recovery to restore iPhone data with ease.

Part 5. FAQs about how do you unlock a disabled iPhone

How do you unlock a disabled iPhone without iTunes?

iCloud is one of another Apple way to unlock a disabled iPhone without iTunes. Of course you can also try FoneLab iOS Unlocker - a third-party tool to remove iPhone passcode within clicks.

Can you unlock a disabled iPhone without a computer?

Yes. But your Find My iPhone feature has to be enabled before. Then you can log in your iCloud account and remove passcode remotely.

iPhone is disabled connect to iTunes, how to unlock?

If you device is unable to connect to iTunes, you can try FoneLab iOS Unlocker. It helps you unlock iPhone with ease.

That's all about how to unlock a disabled iPhone without iTunes or iCloud or computer. We are sure that there is one which can meet your request. Why not download and have a try now!

404 image
FoneLab iOS System Recovery

FoneLab enables you to fix iPhone/iPad/iPod from DFU mode, recovery mode, Apple logo, headphone mode, etc. to normal state without data loss.

  • Fix disabled iOS system problems.
  • Extract data from disabled iOS devices without data loss.
  • It is safe and easy to use.
Free Download Free Download Learn more
How to Unlock a Disabled iPhone without Losing Data

In this article, we take a look at how to unlock a disabled iPhone without data loss. Under normal circumstances, you can fix a disabled device by restoring a device or erasing it via iCloud, both of which cause data loss. If you don’t want to lose the data on your device, the following are some of the options to try. Let’s get started. Step 1: Figure Out if Your iPhone/iPad is Disabled ...

In this article, we take a look at how to unlock a disabled iPhone without data loss.

Under normal circumstances, you can fix a disabled device by restoring a device or erasing it via iCloud, both of which cause data loss. If you don’t want to lose the data on your device, the following are some of the options to try.

Let’s get started.

Step 1: Figure Out if Your iPhone/iPad is Disabled Completely

Your iPhone will be disabled when you enter the wrong passcode too many times. The following is a breakdown of the number of times you can enter the wrong passcode and what would happen if you do:

Wrong Passcode Attempts Disabled Duration iPhone Status
5 attempts 1 minute Not completely locked
7 attempts 5 minutes Not completely locked
8 attempts 15 minutes Not completely locked
9 attempts 60 minutes Not completely locked
10 attempts The device is disabled The device is completely locked

If you see the message, “iPhone is disabled, try again in [number] minutes” the device is not disabled and you can enter the correct code after the specified time elapses.

But if you see the message, “iPhone is disabled, connect to iTunes,” the device is disabled.

Step 2: Check If You Have Ever Backed Up Your iPhone/iPad

When you determine that the device has been disabled, it is important to check if there is a reliable backup of the device’s data. The following are some of your options:

Check if you have a Backup in iTunes

If you have ever connected the device to your computer and performed a backup in iTunes or Finder, then you may be able to save some of your data when you restore the device.

Check if you have a Backup in iTunes

Check if you have an iCloud backup

If you had turned on the iCloud automatic backup feature, you can go to Settings > Apple ID > iCloud > Backup to find out if you have any recent backups. Having an iCloud backup will also mean that you will not lose the data on your device.

Check if you have an iCloud backup

Check if you have a backup with another cloud service or third-party software

Some people back up their devices to Google Drive, Dropbox, and OneDrive. If you had done so in the past or if you used a third-party tool to transfer data to your computer, check if the backup is still viable.

cloud service

Step 3: Try to Back Up Your iPhone

Even if your iPhone is disabled, there is a chance that you may still be able to backup the data on it.

If you are running iOS 11.4 and lower, iTunes will detect the device and it can sync with it even if it is disabled. If you are running iOS 11.4.1 and higher, iTunes will be able to detect the device if you had enabled “USB Accessories” in settings.

If iTunes detects your device, follow these simple steps to back up the device:

Step 1: Click on the device icon on the left side of the iTunes window.

Step 2: Select “Summary” in the sidebar and then click “Backup Now” under “Manually Back Up and Restore”.

Step 3: Click “Done” when the backup is complete.

Try to Back Up Your iPhone

Step 4: Use UnlockGo to Unlock Your iPhone

UnlockGo can help you unlock the iPhone whether iTunes is able to detect the device or not. It is one of the most effective third-party tools to fix a disabled device. The following are its most effective features:

  • It is one of the best ways to remove a 4-digit or 6-digit passcode and it goes further by allowing you to bypass even Face ID and Touch ID.
  • Remove the passcode when iPhone screen is broken, disabled, or locked.
  • It is also one of the best ways to remove iCloud Activation from the device.
  • It is very easy to use, with no tech expertise needed.
  • It supports all iOS devices and the latest iOS 14.

Follow these simple steps to use it:

Step 1: Download and install UnlockGo on to your computer.

Step 2: Run the program and in the main window, click on “Unlock Screen Passcode” to begin.

main interface of unlockgoStep 3: Connect the iPhone to the computer and when the program detects the device click “Start” to begin.

Unlock Screen Passcode

Step 4: You will need to download the latest firmware on to the device in order to unlock it. Just click “Download” to begin downloading the necessary firmware.

Download Latest Firmware

Step 5: When the download is complete, click on “Unlock Now” and the program will begin unlocking the device. Keep the device connected to the computer until the process is complete.

passcode removal process

Step 5: Restore Your Disabled iPhone/iPad Data from Backups

Once the device is unlocked, you will need to get your data back on to the device. Here’s how to do it:

Step 1: Unlock the device and in the “Apps & Data” section, select “Restore from Mac or PC”.

Step 2: Then, open iTunes on your computer and then connect the device via USB cable.

Step 3: Choose the iPhone in iTunes and then click “Restore Backup” to get your data back.

Restore Your Disabled iPhone/iPad Data from Backups

How To Reset A Disabled iPhone: The Quick & Easy Guide ...

Finally, click Erase iPhone to erase your iPhone's data without using iTunes! If this worked for you, then you can skip the first step in our troubleshooting guide. No matter which model iPhone you have, the steps below will show you how to reset a disabled iPhone! First, I'll show you how to erase all the data on your iPhone using iTunes, then explain how to restore backed up data onto your ...

You want to unlock a disabled iPhone, but you're not sure how. An iPhone becomes disabled when the passcode is entered incorrectly too many times. In this article, I'll use a simple guide which will show you how to reset a disabled iPhone!

If you see this message on the screen of your iPhone, it means that your passcode has been entered incorrectly too many times. How many times is too many? Well, if your passcode is entered incorrectly:

  • 1-5 times: your iPhone will not be disabled.
  • 6 times: your iPhone will be disabled for 1 minute.
  • 7 times: your iPhone will be disabled for 5 minutes.
  • 8 times: your iPhone will be disabled for 15 minutes.
  • 9 times: your iPhone will be disabled for an hour.
  • 10 times: you'll see the message "iPhone is disabled. Connect to iTunes" appear on the screen.

One important thing to keep in mind is that if you enter the same sequence of numbers incorrectly multiple times, it will only count as one incorrect attempt. So, if you entered the passcode 123456 four times, it would only be counted once rather than as four separate attempts.

Can I Unlock A Disabled iPhone?

No, you cannot unlock a disabled iPhone. The only thing you can do at this point is erase all the data on your iPhone and start from scratch. Fortunately, if you've ever backed up the data on your iPhone, you'll be able to restore all of your data.

Can I Reset A Disabled iPhone Without Using iTunes?

Yes, but only under certain circumstances. If you want to reset a disabled iPhone without using iTunes, your iPhone must have had Find My iPhone turned on in Settings -> iCloud -> Find My iPhone.

If your iPhone was signed into iCloud when it was disabled, you can erase all of its data using Find My iPhone on iCloud.com. Simply log into your iCloud account, then select your iPhone from the All My Devices menu. Finally, click Erase iPhone to erase your iPhone's data without using iTunes!

If this worked for you, then you can skip the first step in our troubleshooting guide.

No matter which model iPhone you have, the steps below will show you how to reset a disabled iPhone! First, I'll show you how to erase all the data on your iPhone using iTunes, then explain how to restore backed up data onto your iPhone, whether your backup is on iTunes or iCloud.

How To Reset A Disabled iPhone

3 Steps Total
1.

A DFU restore has the potential to fix software problems by completely erasing the code which may be causing your problem. The code is rewritten as if  your iPhone is brand new, so the software problem may get solved.

Think of it like a house that has cracks in the foundation. Rather than try and fix the cracks, we are building an entirely new foundation.

If you can, back up your iPhone before completing a DFU restore. Any time you do a restore, it erases everything from your iPhone. However, after the restore is completed, you restore all your backed up data back onto your iPhone.

Plug iPhone Into Computer
Hold Home and power button
DFU let go home power button

Previous

Next

Watch our DFU restore video walkthrough on YouTube, or follow the steps below:

  1. Using a Lightning cable, plug your iPhone into a USB port on your computer.
  2. Open iTunes if you have a PC or Mac running Mojave 10.14 or earlier). Open Finder if you have a Mac running Catalina 10.15 or newer. It doesn’t matter if your iPhone is on or off.
  3. On an iPhone 6s or older, press and hold the Home button and the power button. On an iPhone 7, press and hold the power and volume down button.  
  4. After 8 seconds, release the Power Button, but continue to hold the power button (iPhone 6s or older) the volume down button (iPhone 7).
  5. Let go of the power button or volume down button when your iPhone appears in iTunes or Finder.
  6. Your iPhone’s display will be completely black if you’ve successfully entered DFU mode. If it’s not, try again from the beginning.
  7. Restore your iPhone using iTunes or Finder.
View More
2.

If the data on your iPhone gets erased, you can restore it if you have the data backed up on iTunes.

restore from itunes backup
iPhone plugged into laptop

Previous

Next

  1. Open iTunes on your computer.
  2. Connect your iPhone to your computer using a Lightning cable (charging cable).
  3. Select your iPhone when it shows up in iTunes.
  4. In iTunes under Backups, select Restore Backup...
  5. From the list of backups, select the one you want to use.
  6. Make sure the iPhone name is correct and click Restore.
  7. If your backup is encrypted, you'll be prompted to enter the password.
  8. Keep your iPhone plugged into your computer while the backup loads and while your iPhone reboots.
  9. When your iPhone has fully restarted, the backed up data has fully restored onto your iPhone and you can unplug your iPhone from your computer.
View More
3.

If the data on your iPhone ever gets deleted, or if you have to perform a DFU restore on your iPhone, you can recover and restore the data from an iCloud backup if you have previously backed up the data.

  1. Make sure your iPhone is not plugged into your computer.
  2. During the iPhone set up process, select Restore from iCloud Backup when promoted on the Apps & Data screen.
  3. Sign into iCloud.
  4. Select Choose Backup.
  5. From the list of backups, choose the one you want to use to restore data on your iPhone.
View More

You're Able To Use Your iPhone Again!

You've successfully unlocked your disabled iPhone! Now you know exactly how to reset a disabled iPhone if it ever happens again. I encourage you to leave me a comment down below if you have any questions about your iPhone, and don't forget to share this article on social media with all the iPhone users you know!

support.apple.com

iPhone X or later, iPhone SE (2nd generation), iPhone 8, and iPhone 8 Plus: Press and hold both the Side button and the Volume down button until the power off slider appears. iPhone 7 and iPhone 7 Plus: Press and hold the Side button until the power off slider appears.

Forgot your iPhone passcode? Learn how to get your iPhone into recovery mode so you can erase it and set it up again.

 

If you enter the wrong passcode on your iPhone Lock Screen too many times, an alert lets you know that your iPhone is disabled. If you can’t remember your passcode when you try again, you need to use a computer to put your iPhone in recovery mode. This process deletes your data and settings, including your passcode, giving you access to set up your iPhone again.

After you erase your iPhone, you can restore your data and settings from backup. If you didn't back up your iPhone, you can set it up as a new device and then download any data that you have in iCloud.

This process requires a Mac or PC. If you're using a PC, make sure that it has Windows 8 or later, and that iTunes is installed. You also need the cable that came with your iPhone, or another compatible cable, to connect your iPhone to the computer.

If you don't have a computer and you can't borrow one, you need to go to an Apple Retail Store or Apple Authorized Service Provider for help.

  1. Unplug your iPhone from the computer if it’s connected.
  2. Turn off your iPhone using the method for your iPhone model:
    • iPhone X or later, iPhone SE (2nd generation), iPhone 8, and iPhone 8 Plus: Press and hold both the Side button and the Volume down button until the power off slider appears.
    • iPhone 7 and iPhone 7 Plus: Press and hold the Side button until the power off slider appears.
    • iPhone SE (1st generation), and iPhone 6s and earlier: Press and hold the Side (or Top) button until the power off slider appears.
  3. Drag the slider to turn off your iPhone, then wait a minute to make sure that it turns off completely.

  1. Get ready by finding the button on your iPhone that you'll need to hold in the next step:
    • iPhone X or later, iPhone SE (2nd generation), iPhone 8, and iPhone 8 Plus use the Side button.
    • iPhone 7 and iPhone 7 Plus use the Volume down button.
    • iPhone SE (1st generation), and iPhone 6s and earlier use the Home button.
  2. Press and hold the correct button for your iPhone while immediately connecting your iPhone to the computer. Don't let go of the button.
  3. Keep holding the button until you see the recovery mode screen on your iPhone, then let go.

    If you see the passcode screen, you need to turn off your iPhone and start again.

If you can’t get your iPhone to show the recovery mode screen and you need help, contact Apple Support.

  1. Locate your iPhone in the Finder or in iTunes on the computer that it’s connected to. (Learn how to find your connected iPhone.)
  2. Choose Restore when you see the option to Restore or Update. Your computer downloads software for your iPhone and begins the restore process. If the download takes more than 15 minutes and your device exits the recovery mode screen, let the download finish, then turn off your iPhone and start again.
  3. Wait for the process to finish. 
  4. Disconnect your iPhone from the computer, then set up and use your iPhone. 

If you can't complete any of these steps, if you're still prompted for a passcode, or if you need any other assistance, contact Apple Support.

Helpful?

Thanks for your feedback.

apeaksoft.com

To undisable an iPhone without iTunes, you may need an excellent tool, such as Apeaksoft iOS System Recovery. Its benefits include: 1. Easy to use. It is able to undisable an iPhone without iTunes in one click. 2. Recovery mode and DFU mode. This program allows you to fix various iPhone problems in recovery mode or DFU mode, even though your iPhone is no service, crashed or broken. 3. Lossless ...

As technology developing, it becomes more convenient to access iPhones using biometrics identification. However, every coin has two sides, so does advanced technology.

It makes people easier to forget password and disable their iPhones due to input wrong passwords too many times.

"My iPhone is disabled, is there anything I can do to undisable an iPhone without iTunes?"

Such questions are common on social networks and forums. The answer is yes, there are several ways to undisable an iPhone without iTunes, such as Find My iPhone and Siri.

In this tutorial, we are going to tell you how to undisable an iPhonewithout losing data.

Undisable an iPhone

Apeaksoft iOS Unlockeris the software to fix disabled iPhone and unlock your disabled iPhone from various password types like Touch ID, 6-digit, 6-digit, etc. Moreover, no matter how many minutes your iPhone is disabled, it can break that and remove the password immediately.

RecommendRecommendation

  • Remove locks from Face ID, Touch ID, 4-digit, 6-digit, customized numbers and alphanumeric code.
  • Remove the existing Apple ID so that you create a new one.
  • Recover Screen Time password or wipe the password to use iPhone without limits.
  • Compatible with all iOS devices like iPhone 12 Pro Max, 12 Pro, 12 mini, 12, 11 Pro Max, 11 Pro, 11, XS, X, 8, 7, 6s, 6, iPad Pro, iPod touch, etc.

Now, let’s see how to undisable iPhone.

Step 1. Connect disabled iPhone

Free download iOS Unlocker to your computer. Install and run it immediately.

Free DownloadFree Download

Connect your iOS device to computer via a USB cable. Choose Wipe Passcodemode and click the Startbutton to continue the steps.

Wipe Passcode

Step 2. Confirm device information

Then the information of your iOS device will be detected automatically. Modify it once the detected information is not correct, and click the Startbutton to proceed.

Confirm iPhone Information

Step 3. Download iOS firmware

Then this program will download the iOS firmware from Apple server. It will take some time to complete the download process and you just need to wait it and keep your computer connected with the Internet patiently.

Download Firmware Package

Step 4. Unlock disabled iPhone

After the firmware download is complete, click the Unlockbutton and input 0000. After that, click Unlockto start unlock the disabled iPhone.

Confirm Unlock

Then your disabled iPhone will be normal and you can create a new screen-lock password to use it.

your iPhone is no service, crashed or broken.
  • 3. Lossless repair. iOS System Recovery has the capacity to fix iPhone problems without data loss.
  • 4. Higher compatibility. This program supports all iOS devices, including iPhone 12/11/XS/XR/X/8/8 Plus/7/7 Plus, etc.
  • 5. Work on Windows 10/8/8.1/7/XP and Mac OS.
  • In a word, Apeaksoft iOS System Recoveryis the best way to undisable an iPhone without iTunes.

    Free DownloadFree Download

    Step 1. Connect disable iPhone to iOS System Recovery

    Download and install the right version of the best disabled iPhone fixing tool to your computer based on your operating system. Connect your iPhone to the computer using Lightning cable and launch iOS System Recovery. Click " More tools" on left sidebar and then select " iOS System Recovery" in the toolbox.

    Interface

    Step 2. Boot your iPhone to DFU mode

    Read the information on the window carefully and click the "Start" button to start diagnosing the disabled iPhone. Click "Question" button and follow the on-screen instuctions to put your iPhone into the Recovery modeor DFU mode.

    Enter iPhone DFU Mode

    Step 3. Undisable iPhone without iTunes

    On the info window, select the iOS version, device model and other info based on your situations. If you are ready, click the " Download" button to get the firmware. After it is downloaded, the program will start fix your disabled iPhone. When it is complete, reboot your iPhone and set a new password.

    Repairing

    You may also want to know: How to recover data from water-damaged iPhone

    restore iPhone from iCloud or iTunes backup.

    Find my Phone

    Siri is not working.

    Step 1. Press the round "Home" button on your device to evoke Siri and ask "What time is it?" Or other questions to display the clock. Tap on the clock icon when Siri shows you the time.

    What is time Siri

    Step 2. When you are taken in to the clock screen, go to the "World Clock" tab and tap the "Plus" icon at upper right corner to add another clock.

    World Clock

    Step 3. On the Choose a city screen, input anything in the box and touch the "Select All" option. Then you will be presented four options, Cut, Copy, Define and Share. Select "Share" to move on.

    Share a City

    Step 4. Tap the "Message" icon on the sharing options screen to open the "Message" app. Input something in the "To" box and press the "return" button on your virtual keyboard to highlight the content in the "To" box.

    Send Messages

    Step 5. Press the "Plus" icon to go to the Info screen, and select the option titled "Create New Contact". Tap add photo option and the hit Choose Photo to redirect to the Photos app. Press your Home button to go to the iPhone home screen and undisable an iPhone without iTunes.

    1. What can I do when I see the message iPad disabled connect to iTunes?

    You may use iCloud to back up iPad, which has the capacity to fix iPad disabled problems. And this way does not need to install anything on your computer.

    2. How to bypass a forgotten iPhone passcode?

    You are able to reset iPhone passcode with iCloud. Open iCloud.com on your browser and sign in with your Apple ID and password. Click the "All Devices" icon in the main interface to find your iPhone. Choose your iPhone icon, and then select "Erase iPhone" button. Then, click "Setup Assistant" to restore iPhone with an iCloud backup file. Now you can access your iPhone without entering a password and reset a new iPhone password.

    3. How do I bypass iPad passcode without restoring?

    You can try Apeaksoft iOS Unlocker. It is the professional iPad password bypass software to help you solve screen lock issues like Face ID, Touch ID, 4-digit, 6-digit, customized number and alphanumeric code.

    Conclusion

    Based on the tutorial above, you might understand how to undisable an iPhone without iTunes. Apple introduced Find My iPhone feature into iCloud to help people control their devices remotely. Though it has limited functions, you can use Find My iPhone to erase lock on iPhone. Plus, Siri is another way to access your iPhone surpassing the lock screen. If you feel these methods are complicated, you can try Apeaksoft iOS Unlocker and iOS System Recovery. They are able to undisable an iPhone without iTunes and offer more benefits, such as lossless repair.

    Free DownloadFree Download

    tuneskit.com

    An easy way to unlock a disabled iPhone without iCloud is using iTunes. Connect your iOS devices with a data cable. Before you do it, please put your iOS device into recovery mode. If your device is iPhone 7/7 plus, press and hold the Power button and Volume Down button simultaneously.

    Posted by Brian Davis on Mar 22, 2021 6:52 AM

    404 image

    There is always a time we forget our iPhone passcode. It is actually a serious problem. When it happens, the first thing we should do is unlock our iPhone. How to? Find back the passcode or ask for a professional. A disabled phone just like a brick. Can we fix or unlock our phones by ourselves? Sure. Today I'm going to show you some tips about how to unlock the disabled iPhone. 3 little tips for you about how to make it easily without iTunes or iCloud or computer.

    404 image

    Tip 1. Unlock Disabled iPhone without iTunes or iCloud

    Using an iPhone recovery tool is the best choice for us to fix our phones. To be honest, a useful recovery tool can fix most of the popular issues we meet. When coming to a situation about stuck on the Apple logo or stuck on recovery mode, an iOS system recovery tool can solve these problems for you.

    What kind of tools should we choose? As for me, TunesKit iOS System Recovery helped me a lot. I recommend it to you not only it can unlock disabled iPhone screen lock, but also the best assistant in solving common iOS issue. Stuck on black screen, stuck in boot loop, or stuck in DFU mode won’t be a question anymore, because TunesKit iOS System Recovery can deal with them quickly and effectively.

    In the following of the text. I would like to show you how to unlock your iPhone without iTunes or iCloud.

    First, download TunesKit iOS System Recovery and install it.

    404 image

    Secondly, connect your iPhone to a computer. Should be noticed, it is not simply connecting to a computer with a data cable. You need to put your device into DFU mode or recovery mode first. Don’t know how to make it? TunesKit iOS System Recovery has prepared an interface for you about how to enter DFU mode or recovery mode. Besides, you can click the Enter/Exit Recovery Mode button.

    404 image

    Choose the advanced mode can repair most of the iOS system issue including removing the screen lock. Before running the advanced mode, please make sure that you know the advanced mode will erase your data. Please remember to back up your phone data.

    404 image

    The next step is important. Make a confirmation that the display iPhone model is the same as yours. If not, please correct it manually, or you can click the Download button to download the firmware.

    404 image

    Finished downloading, click the Repair button to unlock the disabled iPhone without iTunes. Waring again that advanced mode will erase iPhone data.

    404 image

    The repair process is not long, when the progress bar has loaded, your iPhone screen lock was removed and you can use your phone again!


    An easy way to unlock a disabled iPhone without iCloud is using iTunes. Connect your iOS devices with a data cable.

    Before you do it, please put your iOS device into recovery mode.

    If your device is iPhone 7/7 plus, press and hold the Power button and Volume Down button simultaneously. Don’t release the buttons until you see the Apple logo. Then, release the Power button and keep holding the Volume Down button for 5 seconds. When you see the iTunes logo, you can open iTunes and connect your iOS device.

    If your iOS device is iPhone 8 or later, press the Volume Up button first and quickly press the Volume Down button. Then press the Power button until the “Connect to iTunes” icon appears on the screen.

    Done all the processes, click the Restore iPhone button. All of your data will be erased after that, but the screen lock can be removed at the same time.

    Tips: With TunesKit iOS System Recovery, you can automatically enter recovery mode in 1 click for free.

    404 image

    This method requires you have 2 iOS devices. It is a suitable method for those who don’t use computer.

    Apple offers a service named Find My iPhone. With this function, you can unlock your iPhone without computer.

    Firstly, download Find My iPhone from App Store. Then log in to your iCloud. All the devices of your iCloud account will be shown. Find the device you need to unlock and click the Erase iPhone button. The data would be erased and the screen lock will be removed.

    404 image

    Summary

    The above 3 methods are available for you to unlock your disabled iPhone without iTunes or iCloud or computer. With iTunes, you can remove your screen lock without downloading another software. But remember, iTunes requires your iOS device has turned off the Find My iPhone, if not, iTunes can’t do anything for you. The third way I show you may be useless for most users. Because you need 2 iPhones to make it. It is suitable for those who have 2 iPhones or no computer. TunesKit iOS System Recovery should be the best way I think; you can unlock a disabled iPhone without iTunes or iCloud in some clicks. Not only unlock your iPhone, but TunesKit can also help you solve most of the popular iOS system issues.


    404 image

    Brian Davis has covered tech and entertainment for over 10 years. He loves technology in all its forms.

    Tuneskit uses cookies to ensure you get the best experience on our website. Learn moreGot It!
    How to Enable a Disabled iPhone: 12 Steps (with Pictures)

    This wikiHow teaches you how to reactivate an iPhone that's been disabled after too many failed login attempts. Connect your iPhone to the computer with iTunes installed. If you see the message…

    1. 1

      Connect your iPhone to the computer with iTunes installed. If you see the message “iPhone is disabled. Please connect to iTunes,” you’ll need to connect it to the computer on which you’ve backed up your data.

      • This method will only work if you backed up your iPhone to iTunes and know the passcode.
    2. 2

      Open iTunes. If iTunes didn’t open when you plugged in your iPhone, click the iTunes icon on the Dock (macOS), or in the All Apps area of the Start menu (Windows).

      Advertisement

    3. 3

      Click the iPhone icon. It’s near the top-left corner of iTunes.

    4. 4

      Click Sync. iTunes will ask for your passcode.

    5. 5

      Type the passcode and click Restore. This will restore your iPhone with the latest iTunes backup.

      Advertisement

    1. 1

      Check the number of minutes indicated in the notification. After the amount of minutes specified in the message, you’ll be able to attempt another login.

    2. 2

      Enter the correct passcode. If you cannot remember the passcode, continue with this method.

    3. 3

      Connect your iPhone to any computer with iTunes installed. Use the USB cable that came with your iPhone or one that’s compatible.

    4. 4

      Do a force-restart on your iPhone. The steps vary by model:

      • iPhone X, 8, and 8 Plus: Press and quickly release the Volume Up button, then the Volume Down button, and then press and hold the button on the right-side of the phone until the phone reboots to the recovery screen.
      • iPhone 7 and 7 Plus: Press and hold Volume Down and the Power Button at the same time. Keep pressing until the phone reboots to the recovery screen.
      • iPhone 6 and earlier: Press and hold the Home and Power buttons at the same time until the phone reboots to the recovery screen.
    5. 5

      Open iTunes. If iTunes didn’t open when you plugged in your iPhone, click the iTunes icon on the Dock (macOS), or in the All Apps area of the Start menu (Windows). Once the app opens, it will display the Recovery Mode screen.

      • If you see Update as an option on the Recovery Mode screen, click it to see if it gets you back into your phone. If updating doesn’t work, continue with this method.
    6. 6

      Click Restore iPhone…. A confirmation message will appear, informing you that the next step will restore your iPhone to its original factory settings.[1]

    7. 7

      Click Restore. Your iPhone will be reset to its original settings. You’ll be able to set it up from scratch and configure a new passcode.

      Advertisement

    Add New Question
    • Question

      My phone was lost, then recovered. By that time I'd made a claim and received a replacement phone. Now my phone is disabled and I am trying to enable it and it won't let me. What do I do?

      Community Answer

      My best suggestion is to take it into the Apple store. The SIM card should still be in the phone, so they should still be able to get the data from it. Maybe the battery was out, and they can replace it there.

    Ask a Question


    Advertisement

    1. https://support.apple.com/en-us/HT201252

    Nicole Levine, MFA

    This article was written by Nicole Levine, MFA. Nicole Levine is a Technology Writer and Editor for wikiHow. She has more than 20 years of experience creating technical documentation and leading support teams at major web hosting and software companies. Nicole also holds an MFA in Creative Writing from Portland State University and teaches composition, fiction-writing, and zine-making at various institutions. This article has been viewed 95,467 times.

    Co-authors: 6

    Updated: December 9, 2020

    Views: 95,467

    Categories: IPhone

    • Print
    • Send fan mail to authors
    Thanks to all authors for creating a page that has been read 95,467 times.
    appgeeker.com

    Why is my iPhone disabled? In common scenarios, an iPhone is disabled simply because you have put in the wrong passcode too many times. To secure the private information in the device, Apple locks the device in case unauthorized access. The more incorrect attempts you try, the longer the entry timeout is until the iPhone is disabled and says connect to iTunes.

    Is a "connect to iTunes" message displaying on your iPhone, and you can't bypass or unlock it? Here're tips on how to fix iPhone disabled problems.

    Passcode acts as a gatekeeper on your iPhone to protect the device from prying eyes. Anyone — including your kids — that want to unlock your iPhone needs to enter the right 4- to 6-digit password on the screen.

    This is great for keeping your data safe. However, if you forget your passcode and continue to try several wrong attempts, you'll get a reminder "iPhone is disabled. Try again in X minutes" appearing on the screen. The worst thing is, you'll end up with an "iPhone is disabled connect to iTunes" error after too many guesses and the iPhone has locked down permanently.

    404 image

    There is official manual on Apple's support page for fixing a disabled iPhone, just like the error indicates, by connecting the iPhone to iTunes for factory reset. Here we have collected a list of tips and tricks, including a reliable iPhone Unlocker application, to help you unlock an iPhone that says disabled connecting to iTunes and get it working again.

    Contents of this article

    The instructions in this guide apply to all models of iPhone and iPad.factory reset the iPhone and erase all yourshut off the iPhone and re-enter the recovery mode by repeating the steps outlined above again.

    Wait for the iPhone to be erased completely, including all your data and screen passcode.

    Step 5: Set up the iPhone and restore from backup

    Go through the prompts on the iPhone to set up it. Along the way, you have the option to restore the iPhone with a recent backup.

    404 image

    Option 2: How to Reset disabled iPhone with iPhone Unlocker

    Unable to fix the disabled iPhone when you connect to iTunes, or your computer can't recognize the iPhone for restore? You are not alone. That's where iPhone Unlocker comes in.

    iPhone Unlock is a lightweight unlocking application for Apple iOS devices, capable of unlock any model of iPhone, iPad and iPod quickly if you have forgotten the screen passcode. It can do much more than just remove the passcode for you; it can also bypass iCloud activation lock and reset Screen Time passcode with a few clicks.

    Please be mindful that no matter what way—iPhone Unlock is no exception—you use to unlock a disabled iPhone, you will involve a process of factory resetting the device, and lose all your data. You'll be able to restore the device from recent backup later, if you have.

    for Windows | for MacOS

    1. Connect the iPhone that says connect to iTunes into computer, you don't need to open iTunes.

    2. Launch iPhone Unlocker from your desktop, and select "Wipe Passcode."

    3. Check your device information carefully and then click to download iOS software.

    4. The program will reminder you that the process will restore the iPhone to factory settings, enter "0000" to confirm.

    5. Click "Unlock" and you're off.

    404 image

    The application should reset your device in a fast way. Once done, follow the instructions to set up your iPhone as if you bought it the first time. Don't forget to create a new passcode which you can remember.

    Watch the video tutorial to fix "iPhone is disabled connect to iTunes" error:

    Option 3: How to get into a disabled iPhone with iCloud

    Another easy way to fix an iPhone when it says connect to iTunes is using online Find My iPhone feature in iCloud. This is extremely handy for those who don't have a computer that will connect to iTunes, or just want to reset the disabled iPhone without iTunes or computer.

    Here's how you can do with Find My iPhone.

    1. Log into your iCloud account on the web in your friend's laptop or another mobile phone.

    2. Once logged in, click Find iPhone.

    3. Select the iPhone you want to erase from All Devices at the top.

    404 image

    4. Click "Erase iPhone."

    404 image

    After your disabled iPhone is wiped and starts again, A setup assistant will walk you through the setup process. Be sure to restore your iPhone from a recent backup that you made before.use the Find My iPhone app to erase your iPhone.

    What to do if my iPhone is disabled and won't connect to iTunes?

    Typically, when your iPhone is disabled, the iTunes program can't recognize the device in a normal way when connecting. If you can't get the iPhone connected to iTunes, do the following:

    • Update the program to the latest version.
    • Shut off the device and put it into recovery mode. You can follow the steps in Option 1.
    • Don't connect the device into computer before it's in recovery mode already.
    • Use a new cable for connection if the old one is defected.

    If all fails, you will want to use either iPhone Unlocker mentioned in this article or How to recover deleted data files from iPhone.

    How do I fix "iTunes could not connect to iPhone" error?

    Some users have reported that when connecting to computer, there is a message poping up that says "iTunes could not connect to iPhone because it is locked with a passcode. .."

    The simple is enter your passcode to let the iPhone show in iTunes and do a backup and restore. If you forget your passcode, the only way to reset a disabled iPhone is put it into recovery mode (see Option 1 above) and make a clean reinstall of iOS. This will erase all of your data, though.

    How can I avoid getting a disabled iPhone in future?

    To avoid forgetting the passcode and unable to get into your iPhone in future, we've listed a few measures you can take.

    1. Set a more memorable screen passcode that is easier for you to remember. If needed, write down some clues as to what your password might be (first number of your passcode, for example) on your paper or notes.

    2. Another option is to set up additional Touch ID or Face ID, which save your time entering in your 4-digit / 6-digit passcode to unlock the iPhone. You can go to Settings > Touch ID & Passcode (or Face ID & Passcode for newer model) and follow the on-screen prompts to set up it.

    3. Apple integrates a hidden feature on your iPhone that erases all your data completely after 10 incorrect passcode entries in a row. While extreme, it protects your private data from prying eyes using. Think carefully before using this option.

    To turn it on, go to Settings > Touch ID & Passcode (or Face ID & Passcode), enter the passcode, scroll down to the bottom, then toggle "Erase Data" on.

    4. Pocket disabled is another situation you may be experiencing. You can make a few tweaks to your settings to minimize the likelihood of unintentionally disabling the iPhone on pocket. Go to Settings > Display & Brightness > Auto-Lock, and set the screen to turn off automatically after 30 seconds. It's also advised to turn off "Raise to Wake" option there as well. In addition, you will want to turn off "Tap to Wake" by going to Settings > General > Accessibility > Touch.

    5. Also, remember to back up your data regularly. Even if you forget your passcode and it says iPhone is disabled connect to iTunes, you can have the device reset and restore your data.

    fonecope.com

    Tip 2. Factory Reset Locked iPhone with iTunes. Part 1. Factory Reset Locked/Disabled iPhone with iCloud. iCloud account, a reliable solution for most Apple issues, does help to troubleshoot both common and unusual issues. And of course, you can use it to factory reset a disabled iPhone without iTunes. #1 Use Find My iPhone

    "How do I factory reset my locked iPhone without iTunes? It has been disabled for days."

    Possibly, your iPhone is locked, or ever disabled, due to incorrect password cases, such as forgot the passcode currently in force, changed passcode but can't remember, wrongly typing your password for multiple times, etc.

    Would it be hard to reset your locked or disabled iPhone without iTunes? Of course not. And here in this guideline, I will show you how to do it step by step.

    Part 1. Factory Reset Locked/Disabled iPhone with iCloud

    #1 Use Find My iPhone

    #2. Restore iCloud Backup

    Part 2. Easily Factory Reset Locked/Disabled iPhone without iTunes

    Tip 1. Fix Disabled iPhone via Siri (Only iOS 8.0 - iOS 11)

    Tip 2. Factory Reset Locked iPhone with iTunes

    Part 1. Factory Reset Locked/Disabled iPhone with iCloud

    iCloud account, a reliable solution for most Apple issues, does help to troubleshoot both common and unusual issues. And of course, you can use it to factory reset a disabled iPhone without iTunes.

    #1 Use Find My iPhone

    Note: Before starting, remember to ensure your device is connected to a WIFI that is great and stable.

    Step 1. Launch a browser and visit www.iCloud.com. Then log in iCloud account with your own Apple ID password, and then choose "Find iPhone".

    404 image

    Step 2. Move your cursor to "All Devices" and then click on the name of the device you logged in.

    404 image

    Step 3. Three options are provided. To factory reset your locked iPhone, choose "Erase iPhone". By the way, all files on device would be cleared out. After that, you can set up your iPhone soon.

    404 image

    All is done. And no iTunes is needed.

    #2. Restore iCloud Backup

    In the case that you've made a backup via iCloud beforehand, the best solution to reset iPhone to factory settings without iTunes is restoring iCloud backup.

    Step 1. Visit iCloud official site and log in with your Apple ID.

    Step 2. Wait for a few minutes. And then go to Settings.

    Step 3. Select Restore. And you'll see the old iCloud backups. Now check it and choose the most relevant one.

    404 image

    Step 4. Restore from iCloud Backup to reset a disabled iPhone

    Noteworthy, the current files and password on your iPhone will be erased. All you have is the data restored from the selected iCloud backup file.

    Part 2. Easily Factory Reset Locked/Disabled iPhone without iTunes

    In addition, professional unlock software is an unbeatable choice for factory reset locked iPhone without iTunes. FoneCope iOS Unlock stands out for:

    1. High unlocking rate (even if iPhone is disabled)

    2. Able to factory reset iPhone without password

    4. Remove Apple ID from iPhone even Find My iPhone is turned on

    5. Unlock screen time and restriction passcode

    404 image    404 image

    Step 1. Download and run FoneCope iOS Unlock on your PC. Click Unlock Screen Passcode to proceed.

    (Note: For iClould password, choose Unlock Apple ID.)

    404 image

    Step 2. Connect your iPhone to PC. Then the software will automatically detect your device. Now click on the Start button.

    404 image

    Step 4. When you reach the page about the device firmware recommendation, confirm it and click on Download. (If there is something wrong, you can correct it)

    404 image

    Step 5. Next, click on Start to Extract to continue.

    404 image

    Step 6. Once verification succeeds, you can click on Start Unlock.

    Step 7. Enter "000000" for final confirmation, and then click on the Unlock button.

    404 image

    Next, iOS Unlock will begin to remove screen lock and factory reset your disabled iPhone without iTunes.

    404 image

    404 image    404 image

    Tip 1. Fix Disabled iPhone via Siri

    Do you believe that Siri can help you get out the hook of locked iPhone? In fact, using Siri to get into locked iPhone is only available on iOS 8 to iOS 11. For iOS 12, you can refer to how to bypass locked iPhone passcode. You can access the device even without resetting iPhone that is disabled, though, this is not an official method but a bug existing in the system.

    Surprisingly, Siri will not delete your data, and you don't even need to sign in to reset disabled iPhone.

    Step 1. Press and hold the Home button to run Siri and ask "Siri, what time is it?" to show the clock icon.

    Step 2. Tap on the clock icon and then tap on "+" to add a new clock. Navigate to the search bar to locate the city and press on it and choose "Select All".

    Step 3. Then choose "Share" from the options provided and then share the clock through Message.

    404 image

    Step 4. Type anything you want in the receiver bar and then tap on "+" to create a new contact.

    Step 5. Now you should add a portrait for the new contact and tap on "Choose Photo" from the list. Then you will enter to a photo library.

    Step 6. Now you can stop any operations, just pressing the Home button and you can surprisingly get back to the Home page of your iPhone again!

    404 image

    Tip 2. Factory Reset Locked iPhone with iTunes

    If you don't want to take any risks, you can go back to ask iTunes for help. But please do know that if Find My iPhone is turned on, you'll need to sign in with Apple ID password.

    #1 Reset with Recovery Mode

    If your disabled iPhone cannot be recognized by iTunes, boot it into Recovery mode and try one more time.

    1. Power off your disabled iPhone and make sure it's not connected to computer.

    2. If your iPhone is 6s and earlier, press and hold the Home button, and simultaneously use a lightning cable to connect device to computer. Don't release the Home button until the Recovery mode screen appears. As for iPhone 7, do the same steps but using the Volume Down button; for iPhone 8 and above, use the Side button.

    3. A message should pop up. And you just need to choose "Restore".

    404 image

    4. Wait for minutes (less than 15) till the factory reset completes. You'll be notified when it's done. If it stuck or takes too much time, please repeat step 2 & 3 and try again.

    #2. Restore iTunes Backup

    1. Launch and update you iTunes on PC. Next, connect your disabled iPhone to computer with a lightning cable.

    2. After that, navigate to Summary section, and you will find your device information. Click on Restore iPhone.

    3. Click on Restore and just wait for the progress finish.

    4. Once done, you can now Restore Backup from iTunes.

    404 image

    The Bottom Line

    Hooray for resetting locked or disabled iPhone without iTunes! Among the various methods, there's always one for you. Don't be discouraged, follow the instructions step by step patiently and carefully, you can break the Pandora's box in the end!

    Remember that being ready is half the battle. Therefore, back up your data in advance and take a closer look at the steps. Everything you do will increase the success rate!

    support.apple.com

    iPad; iPhone; Watch; TV; Music; Support; Shopping Bag + Cancel . If your Apple ID is locked or disabled. If you or someone else enters your password or other account information incorrectly too many times, learn how to regain access to your account. If your account has been disabled for security reasons. If you see one of the following messages, your Apple ID automatically locked to protect ...

    apple.stackexchange.com

    Once you've done that then do the restore on your iPhone from the backup you wanted to use. NOTE: Ensure that you do not do a new backup of your iPhone 4s before doing the restore. You may want to make a backup of your iPhone 4s backup before you begin, just in case. If you're not sure of where the backups are located, refer to this article.

    How to Undisable an iPhone without iTunes 2021

    How to Undisable an iPhone without iTunes 2021. Watch later. Share. Copy link. Info. Shopping. Tap to unmute. If playback doesn't begin shortly, try restarting your device. Up next.